Pool automation installation in Los Angeles moves the switches, timers and valve handles at your equipment pad onto one controller you can run from your phone. Instead of walking out to turn valves and fire the heater, you tap a button, and the system handles each step in the right order.
We install and program systems such as Hayward OmniLogic, Pentair IntelliCenter and EasyTouch, and Jandy iAquaLink. Installs use the wiring already at the equipment pad; we do not add new electrical circuits. Automation is part of our pool equipment repair work, and at Pool Cleaning Los Angeles it is handled by our owner.
What's Included in Pool Automation Installation
- Equipment survey. We note every pump, heater, light, salt system and valve, plus the breakers and relays that feed them.
- System match. A controller that talks to the brands you already own, sized for the loads you want to control.
- Controller and relays. Mounted at the pad and connected to your existing breakers.
- Valve actuators. Motorized valves so pool and spa modes switch themselves.
- Equipment connections. Pump speeds, heater, lights and salt chlorine generator linked to one app.
- App setup and walkthrough. Remote access tested on your phone, with schedules explained.
Signs You're Ready for Pool Automation
- You switch the spa by hand. Turning heavy valves and waiting on the heater gets old fast.
- Your timer drifts. Mechanical timers lose their settings after outages and only offer simple on and off cycles.
- Your variable-speed pump runs one speed. The programming is buried in a keypad, so it never got set up properly.
- You want to heat the spa on the drive home. Phone control makes that routine.
- An older controller is failing. A dead board or an app that no longer connects is a good time to upgrade.
Still flipping spa valves by hand? Call to talk through an automation setup.
Call (877) 720-8124Our Pool Automation Installation Process
- Walk the padWe check your equipment, wiring, breakers and Wi-Fi signal where the controller will sit.
- Recommend a systemYou get options that fit your equipment and how you use the pool, with the reasons behind each.
- Install and connectController, relays, actuators and sensors go in, and each piece of equipment is wired to its circuit.
- Program schedulesFiltration, cleaner, lights, heat and spa modes are set for your pool and your utility's rate periods.
- Hand it overWe set up the app on your phone, walk you through it and text you a photo of the finished pad.
Pool Automation Options Compared
| Option | Best for | Trade-offs |
|---|---|---|
| Mechanical timer | A single pump with no heater or spa | No phone control; settings slip after outages |
| Pump's built-in schedule | Pools where the pump is the main energy user | Does not run the heater, lights or valves |
| Full automation system | Pool and spa combos with heat, lights and salt | Larger install; brand compatibility matters |
Where the savings come from
Most of the savings come from running the pump fewer hours at lower speed. ENERGY STAR says running a pool filter 6 hours a day instead of 24 cuts its energy use by 75%, and that cutting pump speed in half lets it use about one-eighth as much energy (Source: ENERGY STAR). It also suggests a timer that runs the pump for several short periods each day when debris is a problem (Source: ENERGY STAR).
Hayward says efficient scheduling through its automation can save up to 70% on energy costs (Source: Hayward). That is a manufacturer claim, and your result depends on how the pool was running before. Pairing automation with a variable-speed pump upgrade gives it the most room to work.
What Affects the Cost of Pool Automation
- System and brand. Controllers differ in how many devices they run.
- Number of loads. Each pump, light circuit, heater and accessory needs a relay or connection.
- Valve actuators. Pool and spa combos need them on both suction and return.
- Existing equipment. Older pumps or heaters may need adapters, or may not communicate at all.
- Pad layout. Space for the controller and Wi-Fi reach at the equipment.
We quote once we have seen the pad. Call (877) 720-8124 for a free quote on pool automation installation in Los Angeles.
Pool Automation Installation in Los Angeles: Local Factors
Local utilities point the same direction. LADWP recommends running a variable-speed pump on low speed most of the time for better filtering, less noise and lower electricity use (Source: LADWP), and Southern California Edison advises running pool pumps early in the morning or late at night (Source: SCE). State rules agree: pump controls must default to no more than half the motor's top speed (Source: CA Title 20), and the Energy Code requires new pool systems to have a time switch for off-peak running (Source: Energy Code Ace, Title 24).
Sources
- ENERGY STAR: energystar.gov/products/pool_pumps
- Hayward: hayward.com/why-hayward/explore-products/better-automation
- LADWP: ladwp.com/who-we-are/power-system/energy-saving-tips
- SCE: sce.com/customer-service-center/energy-conservation
- CA Title 20: law.cornell.edu/regulations/california/20-CCR-1605.3
- Energy Code Ace, Title 24: energycodeace.com/content/510-swimming-pool-and-spa-heating